Under normal circumstances, the technology uses secondary air distribution, and the furnace pressure is 500-700mm water column to ensure the normal fluidization of the jet zone. Continuous feeding and continuous production, stable flame, the highest temperature section of the biomass burner can reach 1300℃, which is widely used in industry.
Moreover, the combustion cost is 75% less than electricity, 60% less than fuel oil, 50% less than natural gas, 40% less than liquefied gas, and zero pollution. The inner tank of the biomass burner is made of zirconium-silicon crystals, which is fired in a high-temperature furnace after high-pressure pouring. It needs to be fired at a temperature above 1000°C for three days without loose pores.
Biomass burners belong to biomass semi-gasification automatic control burners, biomass pyrolysis burners that use biomass particles, wood chips, wood powder, sawdust and other organic biomass as fuel, and are generally divided into air-cooled biomass burners And water-cooled biomass burner.
Use renewable biomass energy as fuel to achieve sustainable use of energy. Using high-temperature segmented combustion technology, low NOX, SO2, dust and other emissions in the flue gas, it is the best substitute for oil (gas) burners, electric heating, etc.
Using high-temperature pyrolysis combustion technology, tar, etc. are directly burned in gaseous form to solve the technical problem of high tar content in biomass gasification and avoid secondary pollution of water quality caused by washed tar.
