What are the components of the industry equipment drying kiln burner?
The energy-saving kiln burner uses the waste heat of the kiln to heat and pressurize the fuel in advance, and uses the electric heating jacket to complete the secondary heating of the fuel, and it is heated to the state of vaporization. In the oil-gas mixing chamber, a reasonable oil-gas mixing ratio is achieved. The nozzle is ignited, which saves energy, burns fully, and is convenient to ignite. It does not require high technical indicators of the combustion head. The electrical control is simple, which can reduce the production cost of the kiln and reduce environmental pollution.
The energy-saving kiln burner consists of a closed oil storage tank, a compressor that pressurizes the oil storage tank, a set of water circulation system and combustion head. It is characterized by a heat pipe type waste heat installed in the furnace exhaust flue. The heater, a radiator installed in the preheating tank and a circulating hot water pipe connected in series form a fuel primary water heating system. The oil outlet pipe of the preheating tank is a corrugated elbow, and the outside is covered by two electric heating tiles. Together, it forms an electric preheating built-in fin heater for secondary heating. The outlet of the elbow is connected to the oil-gas mixing burner. The burner can be a single-head or multi-head structure, and each combustion head has an ejector tube. It communicates with the heated air of the kiln, and the front and back of the combustion head are oil and gas mixing chambers, which are sprayed into the kiln.
